Skip to the content
AcrestepSign in

For trainee boom sprayer operators in the UK

PA2 boom sprayer revision: oral questions and calibration maths

Practice questions with a plain-English reason for every answer, and calibration sums with new numbers every time. £7.99 once, no subscription.

  • No account for the free questions
  • Works on your phone
  • Pay once, keep it

Environment, buffer zones, drift and weather

Which of these can make spray drift more likely?

Pick an answer to see the reason.

  • 130+ practice questions
  • Calibration maths, 9 kinds
  • 12 topics
  • £7.99, paid once

Revise the knowledge behind the oral questions, and practise the sums.

See the free questions

A reason for every answer

You see why the right answer is right and why the others are wrong, in plain English.

Nozzles and spray quality

You raise the working pressure on a flat fan nozzle. What happens to the droplets?

Correct: They get smaller. As pressure increases, droplet size decreases (Farm Advisory Service note). Smaller droplets give more leaf cover but less penetration into the crop, and a higher drift risk. Lower pressures give bigger droplets that drift less.

Calibration maths, new numbers every time

Speed, nozzle output, application volume and how much product to put in the tank, each worked through step by step.

You plan an application volume of 200 L/ha. You will drive at 12 km/h with nozzles 0.5 m apart. What output does each nozzle need, in litres per minute (L/min)?

Correct: 2.00 L/min. Nozzle output (L/min) = rate (L/ha) × speed (km/h) × nozzle spacing (m) ÷ 600. So 200 × 12 × 0.5 ÷ 600 = 2.00 L/min. This is the formula on the National Sprayer Testing Scheme operator check sheet.

  • Practise by topic

    Work on one topic at a time, with no clock, and pick up where you left off.

  • See what you have covered

    A tracker for every part of the unit shows what you have revised and what you have not.

  • Made for your phone

    Big buttons, clear text and one question at a time. Revise in short bursts.

12 topics across the unit.

  • Law, codes and operator duties

    12 questions

  • Protecting the operator and driving safely

    16 questions

  • Reading the label for sprayer use

    11 questions

  • Environment, buffer zones, drift and weather

    18 questions

  • Sprayer parts and controls

    9 questions

  • Nozzles and spray quality

    14 questions

  • Pre-use checks, faults and boom safety

    12 questions

  • Calibration: what affects it and why

    8 questions

  • Calibration and quantities maths

    14 questions, with calculations that use new numbers each time

  • Measuring, mixing and filling

    14 questions

  • Operating, marking out and records

    8 questions

  • Surplus spray, cleaning and storage

    6 questions

How the real PA2 works

The City & Guilds assessment is a practical observation with oral questions, one to one with an independent assessor. There is no written test.

That is why Acrestep has no mock exam and no pass mark. It helps you revise the knowledge behind the questions and practise the calculations. It does not replace practice on a real sprayer with your trainer.

Honest about what is here

  • Built around the main PA2 unit: self-propelled, mounted or trailed horizontal boom sprayers. The kerb, band, twin-fluid, air-assisted and wick or brush variants share many questions, but some are written for boom sprayers only.
  • Every part of the unit has practice questions. Some parts, such as cleaning and storing the sprayer, have fewer than others, and we are adding more.
  • You take PA1 first. Check the current requirements with your training provider.

Try it free, then pay once if it helps.

Acrestep is an independent revision aid. It is not the real assessment and is not affiliated with, or endorsed by, City & Guilds, NPTC or Lantra. Every question is written by us from public sources.